25 basic concepts of sheet metal processing

25 basic concepts of sheet metal processing

(1): refers to the use of pressure riveting press or hydraulic press the fastening nuts riveting pressure, pressure riveting screws or nuts riveting pressure column piece firmly connected on the workpiece process.

(2): the first riveting workpiece hole, then the press or hydraulic machine to rivet nuts firmly connected on the workpiece process.

(3): refers to the use of the process is similar to the parent pull riveting. Pull the mother gun rivet nuts (POP) connection firmly attached on the workpiece process.

(4): refers to the riveter riveting tool pin two or more than two workpieces are closely linked with the process of pulling.

Riveted by rivets (5): two or more than two workpieces in process surface together, if the countersunk head riveting, the workpiece to sink hole.

(6): refers to the process of cutting angle on the angle resection using die in the press or hydraulic machine.

(7): refers to the workpiece by the bending process of the forming of bending machine.

(8): refers to the process of forming mold is used in ordinary punch, or other device on the workpiece deformation.

(9) cutting: refers to the material through the process to get a rectangular plate shears.

(10): refers to the workpiece material through the process of LASER cutting and CNC punching blanking.

(11): refers to the process of blanking die processing in ordinary punch, or other devices to get the product shape.

(12): refers to the process of punching workpiece by ordinary punch and die machining.

(13): refers to the process of punching convex hull in the press or hydraulic press mould for the forming of the torus.

(14) red tear: also called the "Red Bridge", refers to the press or hydraulic press die for the forming process of the same shape as the bridge.

(15) draw hole: also called the "edge", refers to the use of the mold in the ordinary punch or other equipment on the forming process of the workpiece hole edge turning. Process.

(16): refers to the process of tapping process of internal thread on the workpiece.

(17) leveling: refers to the workpiece, the workpiece is not flat, smooth process using other devices.

(18) back to the teeth: refers to the process of workpiece with teeth on the advance of the repair of second thread.

(19): refers to the process of drilling holes on the drill in drilling or milling machine.

(20): refers to the use of a mold, chamfer, grinding machine on the cusp of the workpiece machining process.

(21): refers to the process of developing die out of words, symbols or other imprinted on the workpiece..

(22): refers to a similar connection hole countersunk head screws with a class, and the machining process with taper hole on the workpiece.

(23): refers to the process of film formation on the transition of a certain shape.

(24) red mesh: refers to the ordinary punch or die on the workpiece of CNC punch press out of the hole mesh.

(25): refers to the use of the reaming bit or milling cutter to process the workpiece hole to hole.